Waldorf Pulse Manual de usuario descargar pdf (Pagina 13)

User’s Manual Pulse • PulsePlus

☞ Follow these steps to connect the devices:

• Turn all devices off.

• Connect the Pulse's two audio ouputs Stereo Out Left/Mono 헃 and

Stereo Out Right 헂 to your mixing console.

 If you do not choose to connect a mixing console, you can patch the Pulse's output

signals directly to an amp. Use an input usually called Aux or Tape input. If you do

not want to send a stereo signal, use Stereo Out Left/Mono 헃 output. If you do not

insert a plug into Stereo Out Right 헂, then the mono master signal is routed via the

left output.

 Caution: Never use the mic or phono input of the connected amp.

• Connect your keyboard's MIDI Out jack to the Pulse's MIDI In jack 햾 .

• Connect the included adapter to the Pulse's power supply socket 헁 .

• Insert the adapter plug in a suitable wall outlet.

• First switch on the connected MIDI keyboard and then the mixing console and

amp.

 Caution: • Before connecting and disconnecting the Pulse to a power supply

source, turn your amp's volume control all the way down to avoid

damage due to on/off switching noise.

• The Pulse produces a high level output signal (see technical data).

Please take care that the connected playback device is suitable for

the high level of an electronic instrument.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 77 78

Sin comentarios

Waldorf Pulse Manual de usuario Pagina 13